Matrix interconnection unit for Antennas-Receivers in 1.5 ÷ 30 MHz HF range, for both Military and Civilian use, naval and ground installation. Its main features are listed following:
Allows the switching of one antenna to one or more receivers. The Rx matrix is modular; every module is designed for 5 inputs (antennas) and 4 outputs (receivers);
By using an adequate number of modules the desired configuration can be achieved;
The maximum number of inputs/outputs is 10 antennas x 32 receivers;
The modules can be replaced during the operations with no interruption (hot swappable). The control of the matrix can be done locally or remotely via serial line RS 232/422-485;
A BITE circuit indicates an error in closing an RF cross-point;
Flexible configuration, local & remote BITE system;
Outstanding RF characteristics.
Matrix interconnection unit for Antennas-Receivers in 1.5 ÷ 30 MHz HF range, for both Military and Civilian use, naval and ground installation. Its main features are listed following:
Allows the switching of one antenna to one or more receivers. The Rx matrix is modular; every module is designed for 5 inputs (antennas) and 4 outputs (receivers);
By using an adequate number of modules the desired configuration can be achieved;
The maximum number of inputs/outputs is 10 antennas x 32 receivers;
The modules can be replaced during the operations with no interruption (hot swappable). The control of the matrix can be done locally or remotely via serial line RS 232/422-485;
A BITE circuit indicates an error in closing an RF cross-point;
Flexible configuration, local & remote BITE system;
Outstanding RF characteristics.
Additional information
Frequency Range | 10 kHz ÷ 30 MHz (opt. 1 MHz) |
---|---|
Impedance | 50 Ohm |
Insertion Loss In/Out | -6 dB ± 1 dB |
Linearity | 2 dB |
Noise figure | 6 dB ± 1 dB |
Input-Input Isolation | > 50 dB |
Output-Output Isolation | > 50 dB |
Intermodulation Distortion | Suppressed at 35 dB below the maximum input level of -13 dBm |
Gain | 0 ± 1 dB |
Path Connection Loss | ≤ 0.25 dB in the frequency range |
Min number of antenna inputs | 5 |
Min number of receiver outputs | 4 |
VSWR | ≤ 1,5: 1 WITH TEST POINT |
RF Connector | BNC Type for receiver Outputs |
Max number of antenna inputs | 10 |
Max number of receiver outputs | 32 |
Commun. Interface-Remote Control | RS 232/RS 422-485 |
Local Control | Local panel with touch screen |
Power Supply | 230 Vac ± 10 % 45 ÷ 65 Hz 200 VA max |
MTTR | 20’ |
Dimensions | 19” Standard Rack 3 or 6 Unit – depth 500 mm |
Weight | < 25 kg (6 unit) |
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature | – 10° C ÷ + 50 ° C |
Storage Temperature | – 20° C ÷ + 85° C |
Title | Type | Size | |
---|---|---|---|
![]() |
560-00559-000 | application/pdf | 347 KB |