Rackmount DCS 72-128

Rackmount DCS 72-128

The Data Center Systems (DCS) are composed of BLADE-AVANT units for server elaboration and for power supply. The units are characterized by frontal accessibility (AVANT) of modules, connections and commands.
The units are designed for slide mounting (BLADE) and do not require the access to the P.S. rear connector.
The server units are organized on two distinct modules (NODE) in hot swap configuration.

The Data Center Systems (DCS) are composed of BLADE-AVANT units for server elaboration and for power supply. The units are characterized by frontal accessibility (AVANT) of modules, connections and commands.
The units are designed for slide mounting (BLADE) and do not require the access to the P.S. rear connector.
The server units are organized on two distinct modules (NODE) in hot swap configuration.

Additional information

Referred

to a single NODE unless otherwise specified

Number of nodes

2, Each Node is hot swap removable from the front panel

CPUs

4 Xeon E5-2695 v4 CPUs, 18 cores

Cores

36 cores per Node

RAM

128 GB TOTAL, 4 x 16 GB RDIMM per Node, Max installable size: 512GB (256 GB / Node), Max size: 8 x 288-bit DDR4 slots, 2133MT/s ECC Memory Reg. per Node, Memory mirroring supported, One bit error correction

Hard Disks

1,8” SATA SSD, 4 SATA3 channels (6Gb/s), Installed: 1 SSD per Node 480 GB SSD (240 GB opt.), Max 2 SSD hot swap, removable from front panel, Up to 2 internal hot swap SSD (opt.)

PCI-e Slots

1 PCI-E 3.0 LP slot per Node, available to the user

Raid Configurations

Sata Raid 0,1,5,10, Technologies: RSTe 4.0 and ESRT2

Front Ports per Node

2 USB 2.0, 1 RJ45 dedicated to IPMI, 1 Sub-D15S VGA, 2 LAN 10/100/1000 on RJ45, 2 SFP+ 10GbE iSCSI/FCoE

Rear ports

Power Connector, AMP M 50xAWG18

Operating System

Windows Server 2012 R2, VMWare® ESXi 6.0 U2, Windows Server 2016, Windows 10 Build 1511, Red Hat® Enterprise Linux 6.8, SUSE® Linux Enterprise Server 11 SP4, Ubuntu® Server 16.04, CentOS 7.2-1511, Supplied upon request, also newer versions available

Required Height inside the Rack

2UR (88,9 mm)

Total Width including Rack fixing

19’’ (482,6 mm)

System Width inside the Rack

17,56’’ (446 mm) (rails included)

Depth inside the Rack

650mm

Weight

70,5 lbs (32Kg)

Color

RAL-7030 Grey

POWER SUPPLY SPECIFICATIONS

The Power Supply Unit is a separated unit. It is composed of one module in redundant configuration. Each module manages up to two Nodes.
Referred to a single PS module, unless otherwise specified.

Mains Input Voltage 90 ÷ 264 Vac
Frequency 47 ÷ 63 Hz
Max Mains Input Current 7,5 Arms @ 230 Vac
15 Arms @ 115Vac
Putput Characteristics +12V Output, 78A max current
+5Vsb Output, 3A max current
+3,3Vsb Output, 20A max current
Mains Input Connector IEC-310-C14 with retention system
Hot Swap Redundancy Technology Present at power supply module level

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature 0° C ÷ +50° C, according to MIL STD 810G, method 501.5, procedure II
Storage Temperature -10° C ÷ +70° C, according to MIL STD 810G, method 501.5, procedure II
Humidity Up to 90% @ 40°C, without condensation., according to MIL STD 810G, method 507.5, procedure I

 

MECHANICAL ENVIRONMENTAL SPECIFICATIONS

Vibration 4 ÷ 33 Hz according to MIL-STD- 810G method 528 procedure I
Shock 15 g, 11 ms pulses according to MIL-STD-810G method 516.6 procedure I.
Solicitation on each verse along the three axes.

 

SAFETY SPECIFICATIONS

Safety Compliant with EN 60950, Compliant with RoHS, Compliant with REACH, Compliant with CE

 

EMC SPECIFICATIONS

CE102 Conducted Emissions through Power Leads, 10KHz ÷ 10MHz, as per MIL STD 461F – Sect. 5.5
CS101 Conducted Susceptibility through Power Leads, 30Hz ÷ 150Hz, as per MIL STD 461F – Sect. 5.7
CS106 Conducted Susceptibility, 400V transients through Power Leads
RE102 Radiated Emissions, electric field from 10KHz to 18GHz
RS103 Radiated Susceptibility, electric field from 2MHz to 18GHz.
Title Type Size
590-00916-001 application/pdf 401 KB

PRODUCT CODE 590-00916-001 - Need Help? Contact Us Leave Feedback

Share